customized

Ferret Nation Cages: Pros and Cons

These past few weeks have been busy! As we slowly emerge from a long winter, a few major changes have come to LY Chinchillas too: we switched from our custom-built digs over to Ferret Nation 182 cages! Admittedly, I went a little crazy with the purchasing process because we ended up with 3 full double units, but after much deliberation on space and convenience, I’ve decided to keep the third double unit boxed up and in storage until more space allows for it in the future.

To start, I’ll speak a little about the emotional change that comes with a major cage change. We had built our custom cages with time, energy, and great care, and they turned out great. They were a little less spacious than I had hoped given the constraints of finding a convertible wardrobe unit, but the larger cages had a lot of vertical space for the two mosaic girls Lulu & Fifi, as well as my standard firstborn son Mittenmaus. Koko resided in the top cage partition, as she has never (to this day) displayed an iota of jumping capability. Separately, Muff had a custom cage built out of two smaller unit cages that he simply loved, including a climbing wall and lots of space for his jellybean self to roam and chirp. There were some downsides to the custom cages, but overall, they were built with great love and care with safety and personalities in mind.

Ferret Nation Cages

And then, before I knew it, the Ferret Nations were on their way. Honestly, it was a spur of the moment order. I had been thinking about new cages for a while, and after researching options on the market, opted for the 182 model. And then, before I knew it, the Ferret Nations had arrived. The cages have a ton of positive points, but the first few nights were actually filled with anxiety for both me and some of the chins.

The girls didn’t mind at all. They are seemingly more independent and less attached to the comfort of any one place, as if peace of mind is something already engrained in their brains, bringing a sense of ease and calm to their transition. Mitty is an (unsuccessful) escape artist, that’s just how he rolls. He explored his cage to the fullest, memorized each jump and leap and corner, and settled in. Of course, he’s still going forward with his master plan of eventually escaping, and I do wish I could give him a full double unit to himself, but the space is adequate for him and I’m confident that he will adjust over time. Muff, on the other hand, was as nervous as I was. He missed his old cage! Truthfully, this space was a little bit of a downgrade for him, height-wise. The way Muff was acting, I was really starting to doubt my decision. There was a noticeable increase in stress: nervous squeaking, an unwillingness to talk to me or meet my hands, weight loss, and agitated jumping for several days. Part of me wanted to turn back and give him back his old everything, but I made the executive decision to wait and let the new cages settle in – for both me, and the chins.

Muff FN

Ladies FN

Mitty FN

Koko FN

I knew that I purchased these cages for a particular reason: in the hopes that they are the very best, safest, and cleanest option for our living situation right now. Residing in a NYC apartment is not exactly spacious, and every square foot counts. The same day the cages were set up and before I had the chance to reconsider turning back, I had already dismantled the old cages and re-purposed any salvageable kiln-dried pine for ledges and platforms in the new cages. This made it tough, because the moment I started taking parts down, I knew that I wasn’t going to reconstruct the old cages. I had some restless sleep (yes, I’m seriously in tune with my kids) but I lived with it. It was time to move forward. In the following week, all of Muff’s weight loss had been regained, and attitudes from all parties were perking up.

So, that brings me to this very lengthy post – a post which, in many ways, is a formulation of my opinions that are still in infancy. I’ve had the new cages for under a month, and have had some time to modify their interiors to my liking. While I have yet to make any definitive emotional connection with Ferret Nation, I’ve also been forced to put my custom cages in my past. I figured that places me in a unique position to evenly critique the pros and cons of Ferret Nation.

Mitty FN2

PROS

  • User-Friendly, Lots of Control: This is a huge pro! These cages are truly designed for the pet owner, many thanks to Ferret Nation for that. All the points below will simply highlight and point back to this one major pro.
  • Reliable Doors: Two self-locking doors that swing open as far as possible? Yes, please! The doors swing open a lovely 225 degrees. This means you can deal with one chinchilla at a time with all the elbow space you need, without having to worry about another chin’s escape.
  • Mobility: Smooth wheels do the trick. Rolling the cages from room to room or rotating 360 degrees is totally manageable with one person. I should note that although the wheels have worked fabulously for these first few weeks, a double unit cage is pretty heavy and could cause some wear and tear on the wheel function over time. As mobile as these cages can be, they are more suitable for a stationary situation.
  • Light and Ventilation: Nothing sucks more than not being able to see your super cute chinchilla. These cages are awesome for that! Light passes through really easily, making it a little easier to catch the cuteness on camera (which, as chin owners know, is part of the struggle). Bottom levels have a little less light than desired, but such is the payoff for separated top and bottom units. An added bonus of light passage is also air passage, which helps ventilation and improves overall living conditions.
  • Universal Nature: So easy to use and self-explanatory, I would consider trusting a pet sitter to handle these cages – and for me, that says a lot.
  • Longevity: These cages will last for years. They may get scratched up, but these cages will stay relevant and get the job done.
  • Professional Look: The design is simple and sleek.
  • Safe and Sturdy: The bars and overall structure is pretty heavy duty, easing the weight of worry on neurotic owners.
  • Easy to Clean: A simple structural design makes cleaning as easy as could possibly be! Double unit cages have corners that are easy to reach with (almost) no hidden areas for grime to build up in.
  • Resale Value: Hand-in-hand with the “Cost” bullet point in the Cons section, these cages maintain their value pretty well in comparison with other cages.
  • Brand Recognition: The commercial value of this product and presence in the industry is pretty solid. This at least means the brand has been somewhat successful long enough to be oft recommended and widely distributed.

CONS

  • Customization/Inability to Prorate Space: As customizable as the inside space of the cage may be, the size of each cage is fixed. That means there are three choices: 1, 2, or 3 unit cages. I can’t, for example, give a little more height to the boys or a little more width to my girls without adding another overwhelming unit to their existing spaces.
  • More Width Than Height: This might seem like a weird point for some people because most cages are wider than they are high, but with custom cages we had the luxury of being able to customize a safe cage with more height than width, which the chins seemed to love and have more fun with. Of course, you could add on that additional unit and make the height appear, but the overwhelming presence! I would like to point out that this Con is also a Pro, limiting falls and height-related injuries.
  • Presence: These cages command attention and space, and definitely carry a presence. A three unit cage would be a little daunting to run into at a friend’s apartment (unless you love chinchillas, which I’m sure most of you do).
  • Loud: FN cages consist largely of bars, and these bars reverberate sound against any connected point, such as hammock hangers, washers, and attached ledges. Any jump or leap will produce more sound than wood, which better absorbs vibrations and sounds.
  • Bars and Biting: Bar biting is really annoying. Not only is it noisy, but it also leaves a mark – yes, chin chewing can easily create indents and grooves in the cage bars’ powder coating. Behaviorally, it’s a bummer to see your chin trying so hard to escape. Wire mesh in custom cages completely prevents this type of behavior.
  • Cleaning Between the Bars: Tough! Dust is the main contender against a totally clean cage situation. Residual dust settles between the bars, and those little nooks are pretty tough to reach and stubborn to clean, even with a high-powered vac.
  • Ferret Nation Quality Control: Leaves a bit to be desired. Some details are offset, door locks aren’t symmetrical, plastic panels that I didn’t use arrived shattered and broken, and there were minor scuffs on nearly every piece of metal. Part of these problems are due to their shipping practices (one large cardboard box and no reinforcement) but must also be due to manufacturing practices and company quality control. To be fair, there’s a limited one-year warranty and FN will replace broken parts, but if there was a higher standard across the board, there would be no need to go through a time-consuming warranty shakedown.
  • Plastic Bottoms and Platforms: I know there’s a profit to be made, but I could never understand why high-volume national suppliers don’t switch to metal instead of providing their customer’s pets with low quality edible plastic, which can cause blockage or worse. From a caring owner’s standpoint, I’d have hoped for a better industry standard by now. Anyhow, I had to order custom metal pans at an additional cost (which were a great investment, and I’m very happy with).
  • Shaking: Although somewhat subtle, the cages will shake from side to side if your chins are running on their wheels.
  • Cost: The cost is relatively high, but as would be a custom cage of a similar size.

Fifi New Cage

The takeaway? These cages are great for our status quo. Make no mistake about it: when the time comes to buy a house in the country, I have grand plans to painstakingly build fully customized cage mansions for each of the chins (blueprints are already on hand). For now, Ferret Nations will do the job, and do the job relatively well. Stay tuned for future posts about FN cage customization! 🙂

Angled Ferret Nation

LY Chinchillas Treat Donation

Buy delicious hay-based treats or apple sticks for the entire LY Chinchillas family!

$5.00

Advertisements

Custom Pet Portraits!

So, are you guys ready for this? It’s time! I’ve opened a shop on Etsy for custom chinchilla and pet portraits!

Enchilada LYC2Disco LYC2Gible LYC2

In an attempt to encourage everyone to celebrate their respective pet love, I’ve combined my passion for visual art and my sweet, lovable pets to create these art pieces for your space.

Sweetie LYC2Molly LYC2

I use largely natural materials to create my artworks, which are mixed media pieces created with linen paper, homemade herbal paint, fire, charcoal, watercolors, acrylic paint, graphite, and ink. They are carefully created with lots of time and lots of love, and produce an awesome effect that is perfect for any home or apartment!

Nala LYC2Oli LYC2Turbo LYC2

Celebrate your adorable pets with these unique artworks, which are centered beautifully on a 4-ply white archival mat board. The final size is 8×10″, with your pet’s likeness approximately 6×8″. Names and text can be inscribed in ink beneath your pet with a little linen paper plaque. These pieces ship fully assembled in a sleek black 8×10″ frame, and come with a pair of white cotton gloves for handling and care.

Sophie Charlie LYC2

Visit us today! We look forward to spreading art and love to as many awesome pet owners as possible 🙂

LY Chinchillas Treat Donation

Buy delicious hay-based treats or apple sticks for the entire LY Chinchillas family!

$5.00

Get To Know: Mufftoneous

MUFFTONEOUS [my giant goofball] AKA Muff, Muffton, Muffles, Sir Mufftoneous, Fatty

Black Velvet, Born 07/15/2013, approximately 750 grams

Muff Simba

Role in Playtime Kingdom? Full time jester, and part time squisher/carpet puller/hyper-speed zoomer! Muff is full of energy, energy, energy! He is a total sprinter – incredibly fast for short distances, then off to chill out in a tiny crevice somewhere with his watchful eyes peeking out like a paranoid owl. At times, he has been referred to as “overlord,” because sometimes, it really feels as if he’s the universal puppet master (Muff is so simple that he’s.. infinitely complex?).

Favorite Hiding Place? Under the filing cabinet, where he attacks the entrance at great speed! Don’t worry, it’s now been sectioned off, but it doesn’t stop him from trying to burrow in.

 

 

Physical Capability? Agility is super-chinchilla level! Moderate jump height. Willing to walk for rare treats. Will, shockingly, happily finish the entire wood stick, not just the bark. Greatest strength probably being a lack of fear and a sense of youthful invincibility. He is incredibly talented, however, at wall climbing! He even has his own climbing wall in his cage, which has been super customized for his quirky personality.

 

 

 

Vocal? You betcha! Muff will sing, chirp, bark, and from time to time, even scream (especially if he’s hopeful to gain a bit of the girls’ attention). He has been physically vet-cleared as healthy, but there’s some dark music behind that cute little face and gleaming, beady eyes.

Human Cuddle Status? Definitely not. No chance. It’s impossible to contain a squishing athlete! He’ll squirm right out of your arms and bolt away at super speeds! A more recent development, however, is that he LOVES scratches! I’m such a happy chin-momma to see this little guy just melt under the chin and chest rubs!

 

Favorite Way to Be Picked Up? Sir Mufftoneous will only allow a pick-up with a regal hand elevator. Hand is offered, and Muff will hop right on until the destination is reached.

Intelligence? Eh, it ebbs and flows. Muff can be very loving and kind, but a lot of the time he’s totally ridiculous. I question the gleaming universe behind those eyes – is it empty? Is it just a reflection? What is the meaning of it all?

Muffton Squish

Is He Compatible with Other Chinchillas? Muff is in full love with Lulu. He can’t even bear a moment without her (even though he lives a whole room away from her, and only gets supervised playtimes once a month with his lady). Of course, because his heart is taken, no other chinchilla comes close to interesting. Naturally, this means him and Mitty are pretty much sworn enemies. How cute is Muff around Lulu? Take a look below!

 

 

 

 

Ready for a Photo Shoot? Muff will jet off even before you get the chance to set him down on set! Good luck, human! The best bet is for Muff to tire himself out during playtime and grab a few shots when he’s resting – and if you insist on a set, you better have some treats on hand.

Love to Dust? Favorite. Thing. Ever! Muffton will stop at nothing! Dusting is his all-time favorite thing in the world. Dust? MORE DUST PLEASE! He bats my hands away every day when dusting is over, eager for just another roll in the heavenly blue cloud.

Muff Dusty Scale2

Three Words/Phrases to Sum Up His Personality? Fearless Goofball, Hopeless Romantic, Jester Who Refuses to Play by Your Rules!

Muff Vday

Next Week… Lulu!

LY Chinchillas Treat Donation

Buy delicious hay-based treats or apple sticks for the entire LY Chinchillas family!

$5.00

How To: Build a Custom Chinchilla Cage

This week’s post will be all about how to build your own custom chinchilla cage! Since last week’s post, I’ve had many inquiries asking how I built my own cage and the step-by-step process involved. So let’s get to it!

There are a few things to remember prior to making this decision:

  1. Building your own cage is NOT less expensive than buying a quality pre-made cage. In fact, it often runs more expensive in terms of items needed and time spent designing and creating the cage. Our cage cost roughly $600 to construct, and that’s an ongoing number as we continue to modify and improve it.
  2. Knowing your chinchillas well or caring to know about them well is critical to building a successful cage (although there will be many things you’ll learn about them as they discover new spaces). The whole purpose of custom building is to allow your chins exactly what they want and prefer out of a home, so it’s best to keep that in mind when making it the first time around.
  3. This process is extremely time and energy consuming, so it’s best to team up with someone that has some patience and strength! We built our cage in a single day, but we also were incredibly motivated at the time.

Step 1: Gather tools!

For the foundation:

  • Wardrobe unit or sheets of kiln-dried pine, fitting for your space and preference
    • Minimum unit size per chin should ideally be a 3 foot cube; when constructing your own cage it’s beneficial to offer them as much space as possible. Our single units are approximately 4 feet x 3 feet x 2 feet. We would love to give them each a much larger home, but we do live in NYC and have four full units for five chinchillas.
  • Jigsaw, chop saw, or skill saw
  • Hole saw, 4” diameter or larger
  • Drill with self-tapping screws, from ½” to 2” long
  • Drill bits of various sizes, from 1/8” to ½”

For the screen:

  • Mesh wire, ¼” or ½”
  • Wire cutters
  • Carpet trim, metal or wood

For the inside:

  • Kiln-dried pine for constructing ledges and platforms
  • Tubes
  • Hammocks
  • Food Bowls and Hay Racks
  • Dust houses
  • Chinchilla-specific huts, toys, and wheels
  • Granite or marble slabs

For the lighting (if you should choose to include):

  • Light fixture
  • Extension cords
  • Staple gun with ½” long staples

Accessories:

  • Lock
  • Bungee Cords
  • Thermometer
  • Water bottles

Step 2: Construct & Deconstruct the Foundation

This would be a lovely time to create a design for your chinchillas. Depending on how many single units you want to fit in your chinchilla complex, you’re going to have to make some decisions. Who goes where, what they love, who wants to jump, who likes to be lazy, etc. If all your chinchillas are amicable, I’d suggest creating something that could potentially be sectioned off into different levels later on, should any disharmony come into the group.

It’s important to note that most wardrobes purchased at most stores are wood veneer covered chipboard. It’s not ideal – the most ideal wood to use would be kiln-dried untreated pine. However, in my experience, my chinchillas will chew platforms and ledges prior to their cage frames.

So, take a look at the wardrobe you’ve selected. It’s time to mentally construct and deconstruct this guy! You’ll need to keep the frame but remove as much of the walls as possible in order to ensure maximal wire mesh coverage. This is so that your chins have a breezy complex that allows the passage of air through their living space at all times. It’s important for chins to have fresh food, water, and circulating airflow. I try to keep it all very zen and health-conscious in that way. In order to accomplish this, there will need be a sturdy frame and pillar or sections to keep the cage sturdy.

You’ll need to decide the overall structure of the frame prior to assembling or disassembling. It’s best to start out with drawings or sketches, and change as needed if you hit certain roadblocks. Once you’ve made up your mind, you can cut out the front walls, construct the cage and begin to remove certain elements.

The first physical step will be to cut out the front of the cage. The front walls are typically doors, so you’ll need to use a saw and remove the meat of the doors, leaving a frame which will be fitted with wire mesh. The best way to secure mesh is to start tightly from one corner and work your way out, securing with screws as you go in both directions.

Then, you’ll need to construct the frame of the cage, leaving out the back panel. Typically, it will be the back walls that will go completely and the shelving that will stay in some way. You can remove the entire back before it has even been affixed and fit it with mesh instead.

The side walls and ceiling, after the frame is constructed, can contain many unique window cutouts that can be fitted with wire mesh or plexi from the outside. All wire mesh should be affixed from the outside, so that your chinchillas will not have access to biting the sharp edges (which can’t help but stay sharp unless you weld it in some way). Same with plexi, as eating plastic is never chin-healthy. Luckily, some of my chins have an aversion to eating plastics, so based on my personal experience with them, I allow some to have plexi platforms.

As your cage comes together, you’ll notice that the wire mesh is quite unsightly. To solve this, you can purchase lengths of carpet trim in either metal or wood, whatever fits with your theme best. This will serve to cover the edges of the wire mesh, also helping to secure them neatly.

So, at this point, your cage should be fully structurally sound and fully formed. It’s all about moving on to the inside of the cage and personalizing for your little babies.

Step 3: Interior Design

Platforms first! Getting the larger basics down will help section off your space and make for safe, fun levels. I suggest keeping platforms 6-8” apart height-wise just for safety. Any higher, and a fall could potentially hurt your chin. Also, platforms should be around 4-5” wide. Platforms can be secured from one side to the other, or just act as a large ledge protruding from the left, back, or right of the cage.

Don’t forget ledges! Fun rounded shapes for corners, sides, and all around. Sizes can vary, from 3″ upward. We started with cutting a plethora of ledges or preparing appropriate chin-safe wood branches and then went around, screwing them in with hardware from the outside.

Personally, I never worry about ledges or platforms getting dirty or worn down. Kiln-dried pine is relatively inexpensive and easy to replace when you have a custom-built cage, so the chins are encouraged to destroy and munch as much as their little hearts desire.

Great things to incorporate into your cage are bedding pans! I’d suggest powder-coated metal with a drawer mechanism, although for now we are using Vitakraft ECO bedding and creating little litter corners for the kids. It works for us for now; we have had a tough time finding custom pans for the kids, so we’ll wait until we’re ready to create custom metal pans.

For our cage, we went with aluminum tubes – my chins don’t even show the slightest interest in chewing metals (although if yours do, this is not a safe option). They’re very sturdy and a year in, they look as new as the day we got them. There are many different sizes and shapes for chins who love to cuddle or just relax on their own. I know many people use fleece-covered PVC or cardboard tubes; that’s a great addition too.

Fun additions are little chin-holes for traveling between units! This works great for chins who want a little space from a friend, or some time to reflect on which unit is their favorite. We did this for our kids early on; when they became inharmonious together, we simply closed off the adjoining holes and brought back some peace to the family.

As far as food provisions go, we use PVC tube coverings (they look like little bowls) with a screw through the bottom, which then connects to a drilled hole at the bottom of their cage. The bowls are easy to remove and stand-alone, which is pretty cool. Everyone except Muff gets this PVC, because they know not to chew plastic. Muff, on the other paw, has a glass bowl for his food. We still use physical glass bowls for hay, because our chins don’t have any respect for hay racks.

We also screwed down a few slivers of pine to affix granite slabs in their place, so they can freely be placed on a platform without a worry of being shifted. We have never had a problem with our chins and screws, because we use a countersink method (which means the screw falls flush or deeper than the wood).

Hammocks, huts, wheels, and toys are final additions for the kids. Some use these items more than others; it’s a great chance to personalize each area for each chinchilla. I personally don’t let them have individual dust houses, but that’s only because their cage is in our living space (so it would be wildly messy – even more-so than the crazy cleaning schedule we have now) and I also enjoy handling and bonding with them each and every day when they receive their dust baths. It’s a nice daily ritual we have, and it works for us.

Step 4: Lighting and Accessories

We’ve tried a few different lighting techniques for the cage. It’s easy to lose the kids in a dark background (especially if your chin’s fur is dark as well), so lighting is a great option if done safely. We always use low power LED lights that don’t generate any actual level of noticeable heat, fixed to areas that the chins can’t reach – such as the cage ceiling or on the outside, near but not on a window. The lights we have now have a switch for easy on/off. We use extension cords to power the lights and used a staple gun to adhere the wires flush to the outside of the cage, creating a clean look. We always unplug the light if we aren’t using it, or are out of town for a day or two.

Finally, we have bungee cords at the top and bottom and a lock in the middle! The bungees are to keep the cage doors flush and quiet when they wall jump; the lock is to keep the entire cage secure. Also, there are two glass water bottles adhered to the outside of the back of each cage unit, just in case one water bottle goes wonky. We also placed a thermometer on the cage so we know exactly what the temperature of their environment is, and can adjust accordingly. We never let the room get higher than 75 degrees Fahrenheit.

Step Five: Kick Back and Enjoy!

So, there you have it! The long, arduous, and very rewarding process of building your own custom chinchilla cage! It’s incredibly easy to make changes to your cage once it’s up and running, and your chinchillas will never look back at their old cages. It’s not for everyone, and it’s certainly time, energy, and money consuming, but it’s a really great experience to feel as if you’ve given a part of your creativity and design to your babies. Admittedly, there are many different avenues to feel this way; this is only one!

Be sure to follow the blog by signing up via email, subscribe to us on YouTube, Facebook, Instagram, and Twitter! Requests for our Weekly Wednesday Blog Post topics can be submitted through any social media outlet, via lychinchillas@gmail.com, or directly through the blog!

We leave you with a sweet donation opportunity and wish you a wonderful holiday week!

LY Chinchillas Treat Donation

Buy delicious hay-based treats or apple sticks for the entire LY Chinchillas family!

$5.00